V451 CLAPET CRÉPINE
V451 Clapet Crépine avec Clapet Anti-retour est conçu pour être installé du côté aspiration d’une pompe. Le but d’un clapet de pied est de maintenir l’amorçage de la pompe entre les cycles de pompage. Une crépine empêche les débris de pénétrer dans le système de tuyauterie. Les clapets de pied sont conçus pour minimiser la perte de charge et optimiser l’efficacité du pompage.
Application Range
- Reservoir Lakes
- Dam Sites
- Seawater Applications
- Suction Lines
Related Products
- V851 Y-Strainer
- V852 Basket Strainer
- V651 Rubber Expansion Joint
- V151 Gate Valve
- V106 Butterfly Valve
Foot Valve with Check Valve Product Features
- Spring loaded foot valve for pumping stations, water treatment and supply, networks clean water distribution, irrigation, and re protection networks.
- They are an inexpensive way to maintain prime on a single centrifugal pump.
- It is designed with a 10% larger flow area (including heavy stainless steel strainer) than the pipe size to insure minimal head loss.
- The valve shall be globe style, flanged with resilient seal against metal; provide full flow equal to valve size and shut-off silently.
- A heavy gauge 360 degree, stainless steel strainer (not plated steel) having a flow-thru area of at least three times that of the foot valve flow area shall be connected to the outside diameter of the inlet flange.
- The foot valve provides years of trouble free operation at low or high pressures.
- Full Flow Foot Valves designed to have the high quality, long wearing construction necessary for valves that are continually submerged in a wet well and not readily accessible for inspection or repair.
- The seal cannot be damaged from compression and pump prime is always assured.
- A 360 degree stainless steel strainer is provided standard with three times flow-through area of the foot valve size.
- Hydrostatic test pressure for seat: PN x 1.1 , for shell: PN x 1.5 according to EN 12266-1.
